Blog

April 28, 2015
Comments Off on Propelex rack splitter buffer 2 in 8 way
Features Easy to use bidirectional Ethernet-DMX conversion. 4 or 8 DMX Universes. Merging and Ethernet protocol conversion of DMX data (sACN/ArtNet) Intuitive, simple web interface or front-panel control. All Neutrik™ connectors: Locking PowerCON mains, EtherCON, XLR, OpticalCON. NEW fibre optic version with OpticalCON connector! Designed for extreme conditions and temperatures. ProPlex “Blue Box” RackMount and PortableMount Mini enclosures – Built for the Road!
April 22, 2015
Comments Off on LanBox LCX
The LanBox-LCX is an autonomous and versatile DMX controller that can be implemented in almost every application that requires stand-alone operation of DMX lighting, MIDI, RS-232 and other equipment. The LanBox-LCX can be programmed and controlled using the free software LC-Edit for Mac and PC, or via third party software like Max/MSP, Isadora, Ableton or other software that allows programming of MIDI and TCP command. For the LanBox-LCX there is an extensive set of manuals, examples and tutorials. General information The LanBox-LCX is a powerful and versatile controller. It is equipped with Ethernet, USB, MIDI in and out, DMX in and out, eight analogue inputs and eight digital outputs. All these inputs and outputs can be connected and programmed. For example, you can use analogue faders to directly control programmed DMX cues inside the LanBox-LCX. Or you can use Art-Net data to trigger cues that will start up to eight RS-232 controlled devices like the iPad. Or you can use the DMX input to send MIDI messages. Or everything at the same time of course. This is all done extremely reliable due to industrial grade hardware and firmware, and once programmed, it is done autonomously, without the use of a computer. LanBox-LCX Features The LanBox-LCX has a DMX in- and output. (A, see picture below). The DMX output has an output patcher and different curves and slopes can be assigned per channel. The output patcher connects the 512 DMX channels to the 3072 internal mixer channels. Also, all data received from for example the DMX input can be assigned to any one of the 3072 mixer channels. Using the abundant amount of internal channels, it is possible to use extensive programming. The MIDI ports (B) can both send and receive any type of Controller, Note and SysEx message where all these messages can be assigned to individual mixer channels and cues. Also MIDI Time Code (MTC), SysEx and Midi Show Messages (MSX) can be used. The Ethernet port (C) can be used for both sending and receiving of data via UDP and Art-Net. Also this port can be used to fully control and program the LanBox via TCP (for example using Crestron of Max/MSP). At the back side of the LanBox there are eight analogue inputs and eight digital outputs. Each input has an 10 bit (1024 steps) resolution. The inputs are mapped to the internal mixer channels, but these can also be used to -for example- control cue properties like transparancy or speed or trigger a cues based on the input value. The digital outputs are also multipurpose.Every output can be used arbitrarily as a switch or as a RS-232 output. Each output can directly provide 20mA of current, but using the many +6VDC outputs also at the back of the LanBox the full power of the adapter (1000mA) can be used. One or more of the outputs can also be used to send RS-232 messages. Using this feature it is possible to control equipment like iPods, projectors and media players.
April 22, 2015
Comments Off on WDMX Transmitter/ receiver
The W-DMX™ ProBox F-2500 is our top of the line, 2 universe transmitter/receiver and 1 universe Repeater, all in a single box 19” Rack unit. With built in Ethernet protocols in/out, the unit supports ArtNet, Streaming ACN and ETC Net3, along with on the fly conversion between that and RS-485 DMX and RDM. Bundled with the free RDM controller software, configuring devices connected to the ProBox F-2500 is quick and easy with any connected PC. The W-DMX™ ProBox F-2500 supports both the 2.4GHz and 5.8GHz frequency bands, and uses interference free Adaptive Frequency Hopping technology.
  • Dual Universe Outdoor DMX/RDM Transmitter, Receiver and Single Universe Repeater
  • W-DMX G4 Protocol – backward compatible
  • Rack-mounted 19” Slimline Case
  • Invisi-wire High-Fidelity Technology - Output matches Input
  • Datasafe Technology - Wireless Fidelity and Error correction
  • Less Than 5ms Latency
  • High-Speed Frequency Hopping - 1800 times per second
  • Complete DMX512 support
  • Full RDM support
  • One-button-to-go support, for incredible ease of use
  • Adaptive Frequency Hopping Radio
  • 2.4GHz radio – license free worldwide
  • 5.8GHz dualband – provides access to ‘virgin’ spectrum
  • Ships standard with Ethernet lighting protocol support
  • 12V and 110 - 240V AC Power
  • Interchangeable antennas
  • Ships standard with 2dBi outdoor antenna
  • Compatible with all W-DMX OEM products
  • Built in RDM controller and W-DMX configuration tool
Dual band function with 5.8GHz is not availble in all countries, please contact your local dealer or Wireless Solution for more information.
April 22, 2015
Comments Off on Enttec DMX streamer kit

General Description

The DMXStreamer is the most valuable DMX512 tool you will find. This product records any DMX512 stream for up to 48 hours. You simply play your lighting sequence and record it with the DMXStreamer. You can then play it back when you need it, or automaticaly based on time of day with the inbuilt astronomical real time clock. Already used in hundreds of venues around the world, this unit is great for any architectural work thanks to the inbuilt clock and scheduling features or simply backing up a lighting control system in case problems occur. The automatic backup will start a predefined show if there is loss of DMX signal. A recording time estimate chart is available in the user manual.

Major Features

 
  • DMX512 streaming recorder/playback system
  • Full 512 channel streaming recorder
  • Up to 26 shows
  • Up to 48 hours of real time recording

Hardware

The DMXStreamer fits into a robust 9.5 inch 1 Unit rack.
April 22, 2015
Comments Off on Artistic License Down-Lynx kit
Wall mount Art-Net or sACN to dual DMX512 Down-Lynx converts Ethernet data into two universes of DMX512. Down-Lynx is housed in a standard 'Two-Gang' panel that is compatible with all standard UK conduit and surface mount boxes; back box supplied. The Ethernet connection is made to the rear of the panel via an RJ45 connector. Power can be connected by a separate cable, or via the Ethernet cable using the IEEE 802.3 standard. The front panel provides two DMX512-A outlets which support RDM. Configuration is simplicity itself. The three rotary dials are used to select the required DMX512 universe. Down-Lynx can be software upgraded via the network connection.

Features

  • DMX routing by Ethernet
  • Art-Net 3 and sACN compatible
  • Two DMX512 outputs
  • 10BaseT Ethernet Port
  • DHCP supported
  • Power indicator
  • Data activity indicators
  • Compatible with DMX512-A
  • RDM V1.0 (E1.20 - 2006 ESTA Standard)
  • Back Box supplied

Specifications

  • Listing: CE FCC
  • IP Rating: Indoor use
  • Power: 2W
  • Input Voltage: 9-48VDC
  • Height: 85mm
  • Width: 146mm
  • Depth: 39mm
  • DMX Output Connections: XLR5
  • Network Connections: RJ45
  • Power Connection: RJ45 or IDC
  • Isolation Ethernet port: Isolated
  • Isolation Power input: Isolated
  • Isolation DMX A/B: Ground Referenced

Shipping

  • Net Mass: 0.21 kg
  • Approximate Carton Mass: 0.36 kg
  • Approximate Carton Dimensions: 220 x 180 x 120 mm
  • Volume: 4752000 mm³
  • Manufacturer: Artistic Licence Engineering Ltd
  • Country of Manufacture: The United Kingdom
April 22, 2015
Comments Off on Artistic License Uplynx kit
Dual DMX512 to Art-Net Up-Lynx™ is part of the growing range of Art-Net compliant Ethernet products. Up-Lynx converts two universes of DMX512 into Art-Net Ethernet data. Up-Lynx is housed in a standard 'Two-Gang' panel that is compatible with all standard UK conduit and surface mount boxes, back box supplied. The Ethernet connection is made to the rear of the panel via an RJ45 connector. Power can be connected by a separate cable, or via the Ethernet cable using the IEEE 802.3 standard. A screw terminal connection for both power and data is available to special order. The front panel provides two DMX512-A inputs. Configuration is simplicity itself. The three rotary dials are used to select the required DMX512 universe. Up-Lynx can be software upgraded via the network connection.  

Features

  • DMX routing by Ethernet
  • Connect up to 256 DMX Universes to one network
  • Two DMX512 inputs
  • 10BaseT Ethernet Port
  • Compatible with DMX512-A
  • Power indicator
  • Data activity indicators
  • Art-Net Compatible
  • Back Box supplied

Specifications

  • Listing: CE FCC
  • IP Rating: Indoor use
  • Power: 2W
  • Input Voltage: 9-48VDC
  • Height: 85mm
  • Width: 146mm
  • Depth: 39mm
  • DMX Input Connections: XLR5
  • Network Connections: RJ45
  • Power Connection: RJ45 or IDC
  • Isolation Ethernet port: Isolated
  • Isolation Power input: Isolated
  • Isolation DMX A/B: Non-Isolated

Shipping

  • Net Mass: 0.17 kg
  • Approximate Carton Mass: 0.28 kg
  • Approximate Carton Dimensions: 220 x 180 x 120 mm
  • Volume: 4752000 mm³
  • Manufacturer: Artistic Licence Engineering Ltd
  • Country of Manufacture: The United Kingdom
April 22, 2015
Comments Off on Chroma Q buffer 4 x 5 pin
The Chroma-Q® 4Play™ is a fault tolerant, self healing 4 way DMX buffer designed to fully isolate all outputs from each other. Supplied with 4 x 5 pin connectors, each output is separately generated and boosted from the original DMX signal. The 4Play is suitable for truss mounting with a normal hook clamp and will work with mains voltages world-wide. It also features a chassis mounted IEC male to assist international cabling.
Chroma-Q 4Play

Key Features

  • 4 way DMX buffer
  • Fault tolerant, self healing
  • Each output fully isolated
  • 4 x 5 pin XLR connector outputs
  • 1 x 5 pin XLR connector input and through
  • Each output is separately generated and boosted from the original DMX signal
  • Data and power indicators
  • Suitable for truss mounting with a normal hook clamp
The Chroma-Q® 4Play™ is a fault tolerant, self healing 4 way DMX buffer designed to fully isolate all outputs from each other. Supplied with 4 x 5 pin connectors, each output is separately generated and boosted from the original DMX signal. The 4Play is suitable for truss mounting with a normal hook clamp and will work with mains voltages world-wide. It also features a chassis mounted IEC male to assist international cabling. « Back to 4Play overview

Technical Specifications

Product code DMX4
A 148mm / 5.9"
B 158mm / 6.3"
C 40mm / 1.6"
Weight 0.6kg / 1.3lbs
Power connector 100-240V 50/60Hz, 15W, IEC chassis male
DMX connector in/out XLR5
DMX connector out XLR5
DMX connector thru XLR5

Ordering Information

April 22, 2015
Comments Off on Avolites truss splitter buffer 6 x 5 pin
The Avolites Truss Splitter is a single channel system that will buffer, multiply, isolate and protect DMX outputs from consoles. Inputs:1 x 5 Pin F-XLR Input Outputs:1 x 5 Pin M-XLR Loop Output 6 x 5 Pin M-XLR Isolated Outputs Power Consumption:2 Amps Flying Weight (Kg):2.5 Transport Weight (Kg):2.8
April 22, 2015
Comments Off on Propelex rack splitter buffer 2 in 8 way
Struggling to find any information on this equipment - can you let me know what I should be searching for please? Ta!