Blog

May 20, 2015
Comments Off on Anytonics Quad dim 4 x 10A DMX dimmer
May 20, 2015
Comments Off on Avolites power cube dimmer 63A 3ph
A complete Dimming, Mains and Data Distribution Solution in one box! The compact box with proven Art 2000 technology is quick to set up. It boasts 12 dimmer circuits@10amp each, 6 combined dimmer and fixed mains. Tech Spec Dimmer and distribution channels- 10A C type ABB breakers Distribution channels 16A C type ABB breakers (5-10x I nominal inrush current). Captive Mains tail of 1.2m H07R 5x 10mm2 fitted with a 63A 5 pin Cee connector. Flight-case and dimmer provide for easy storage of this cable Mains supplies either 63A 3phase+N TN-S or 63A single Phase +N. Mains inlet breaker 63A D type ABB breakers (10-15x I nominal inrush current). Three individual single phase 63A 30mA residual current breakers to protect operators. Each RCB protects one phase, therefore increasing the selectivity of the RCB protection. (BS7909 requirement). Mains breaker is a four pole unit that also protects the Neutral wire which is important in case of single phase operation. Socapex or Harting output connectors available
May 20, 2015
Comments Off on IP65 DMX dimmer 16A single channel
May 20, 2015
Comments Off on Avolites Art 2000 24 way T2 Dimmer Chassis Kit
This dimmer is a ready-to-roll compact dimming system and distro panel, ideal for small tours or locations requiring distributed dimming over a large area. 
It features a variety of mains input options, including CEE, Camloc or Powerlock with loop outs if required. The optional integrated hotpatch offers a total of 72 outputs, patched to either Harting or Socapex multi-pin connectors.
 A further set of independent outlets is standard, making it easy to power moving lights or other non-dimmer devices through the multicore cable. TECH SPEC Cost effective dimming and distribution solution 24 channels at 16 Amps at 100% duty cycle 12 channel, hot-pluggable modules Selectable dimming or mains distribution modules 240 micro-seconds rise time suppression chokes Dual isolated DMX inputs with Merge and patch Individual channel faders for setting levels or controlling on-board memories Smooth dimming of low voltage, low wattage or inductive loads Fully flight cased, stackable systems
May 20, 2015
Comments Off on Avolites Art 2000 48 way T4 Dimmer Chassis Kit
The Avolites Art 2000 48 way T4 Dimmer Chassis Kit, available for hire from DPL Production Lighitng, provides a complete solution to Dimming and Moving Light Power distribution. There is no need to have separate mains distribution which makes set up times faster and lowers the number of individual components needed to put a show together. The Avolites Art 2000 48 way T4 Dimmer Chassis Kit controls up to 48 individual channels using four plug in modules of 12 channels each. The design incorporates full monitoring and status feedback via the backlit LCD display. Static state environments are catered for using the front panel control faders. Further 12 memories can be recorded for later replaying either as a simple show in the event a console is not available. SPECIFICATIONS 48 channels at 16 amps per channel Channels can be specified as dimmable or hotpower Excellent noise suppression with 250uS chokes 100% duty cycle Double pole circuit breakers available, both live and neutral protected Three Phase and Single Phase operation Individual faders for each channel for use as channel test, scene setting or for controlling the on-board memories Two isolated DMX inputs with DMX merge Full softpatch in module – any dimmer channel to any DMX channel on both lines Large back-lit LCD display showing patching, dimmer levels and status No sub menus – 15 buttons each with dedicated function Internal memories for stand-alone operation, each with master fader Link facility to allow module faders to become memory masters for the entire rack or system 16 dimming response curves Output voltage limit from 1% to 100% Mains frequency tracking Input power on Camloc or Powerloc connectors, other possibilities to special order Voltage metering Optional loop out power connectors Optional Current metering Optional RCB protection on all channels Choice of multipin output connectors.