Luminex DMX 8 (Artnet to 8 universe DMX node)

The Ethernet-DMX8 MkII is an Ethernet node that serves eight DMX512 outlets, compatible with the Artnet and sACN protocols. All outlets are conform to DMX512-A and can be used as input or output.
The two Ethernet links on the front and at the rear are 10/100BaseTX connections on Neutrik RJ45 Ethercon connectors. The Ethernet-DMX8 MkII embeds a built-in switch fabric which allows to use the converter as an Ethernet repeater.
All configuration can be done over Ethernet through a build in Web site. This all comes in a 19″ 1 unit high metal housing that can be rack mounted.

Connections:

  • 2 x 10/100BaseTX Ethernet connections on shielded Neutrik RJ45 Ethercon connectors
  • 8 x DMX512-A in/outputs on shielded and isolated gold plated 5 pin female XLR, with termination (DMX512-A)

Features:

  • DMX routing, universe setting
  • Input and output enable / disable
  • DMX output frame rate setting
  • Supported protocols: DMX, DMX512-A, RDM, Art-Netâ„¢, sACN
  • Protocol selection per port
  • IP settings
  • Unit ID and labeling
  • Ethernet activity indication on front panel
  • Up to 40 programmable profiles and routings
  • Up to 10 predefined profiles (splitters, mergers…)
  • Multi language Web interface

Operation:

  • Ethernet <-> DMX conversion
  • Ethernet and DMX Merger
  • Ethernet and DMX Backup
  • DMX splitter / booster
  • DMX trigger. Remote selection of the control source
  • Built-in DMX softpatch
  • Wysiwyg enabled. DMX inputs can be visualised in Wysiwyg
  • DMX snapshot. Capture 3 fixed lighting states per outlet
  • Modification of captured values from the Web interface
  • Auto-load capture on boot-up (ideal for expo)

Comments are closed.